Filter
Top Products
19
STEP2 : configure the numbering with phone/line ports.
Phone Number
The representation number is the phone number of the
telephone that is connected to Phone port
Line Number
Line ports are connected to the extension ports of the PBX
system or the PSTN line. They have a common Line
Hunting Group Number. When this number is dialed, the
Gateway system will find a free FXO line connected to
PBX. This hunting will skip all busy lines and absent lines
and find only the idle line to the PBX. After the available
line is found, you can hear the dial tone from PBX. After
that, you can dial the needed phone number out through
PBX
STEP3: Let GW Register to Gatekeeper/SIP Proxy Server
(If user does not have Gatekeeper/SIP Proxy Server, Please go to STEP 4: Outgoing Dialing Plan)
Gatekeeper IP address
There is a gatekeeper address fields. If this gateway does
not want to register to any gatekeeper, just set value
0.0.0.0 to the primary gatekeeper address.
SIP Proxy Server IP
addresses
There is a SIP Proxy Server address fields. If this gateway
does not want to register to any SIP Proxy Server, just set
value 0 .0.0.0 to the sip proxy server address.
STEP 4: Outgoing Dialing Plan
The purpose of “Outgoing Direct Call” setting is to let user create a proprietary dialing plan when this
Gateway is not registered to any H.323 Gatekeeper or any SIP Proxy Server. This setting can also
assign some dialing plan to local ports (including prefix strip, prefix addition).
Through this setting, user can directly map a number to a specific gateway (IP address).