Filter
Top Products
23
DHCP Client (Dynamic IP): (get WAN IP address automatically)
IP Address: If you are connected to the Internet through a Cable modem line then a dynamic IP
address will be assigned.
LAN Setting
There are two kinds of network feature to configure: Bridge Mode and NAT Mode
Bridge Mode:
Select this Gateway as Bridge. (WAN Port and LAN Port use the same IP address)
NAT Mode:
Each of the VoIP Gateway has two Ethernet interfaces, one is for connecting to local network users,
and the other is for connecting to an external broadband device (i.e. DSL modem/router or Cable
modem). The LAN port is connected to the local Ethernet network. WAN is connected to the external
broadband device. The LAN IP address/netmask is for private users or NAT users, and the WAN IP
address/netmask is for public users.
LAN IP Network Configuration
IP Address: Private IP address for connecting to a local private network (Default: 192.168.0.1).
Subnet Mask: Netmask for the local private network (Default: 255.255.255.0).
WAN port display the IP address, Subnet Mask and Default
gateway IP address if DHCP client is successful
Note