Filter
Top Products
Parameter Description
PPTP
Allow user to make a tunnel with remote site directly to
secure the data transmission among the connection. User
can use embedded PPTP client supported by this router to
make a VPN connection.
IP Address
If you select the PPTP support on WAN interface, fill in the
IP address for it.
Subnet Mask If you select the PPTP support on WAN interface, fill in the
subnet mask for it.
Server IP Address Enter the IP address of the PPTP Server.
User Name If you select the PPTP support on WAN interface, fill in the
user name and password to login the PPTP server.
Password f you select the PPTP support on WAN interface, fill in the
user name and password to login the PPTP server.
MTU Size Fill in the mtu size of MTU Size. The default value is 1400.
Request MPPE
Encryption
Click the checkbox to enable request MPPE encryption.
Attain DNS Automatically Click to select getting DNS address for PPTP support.
Please select Set DNS Manually if the PPTP support is
selected.
Set DNS Manually Click to select getting DNS address for PPTP support.
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address to be
cloned.
Enable uPNP Click the checkbox to enable uPNP function.
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from WAN
side.
Enable WAN Echo Reply Click the checkbox to enable WAN ICMP response.
Set TTL value Click to Enable and set Time to Live value.
Enable uPNP Click the checkbox to enable uPNP function.
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from WAN
side.
Enable WAN Echo Reply Click the checkbox to enable WAN ICMP response.
Enable IPsec pass
through on VPN
connection
Click the checkbox to enable IPSec packet pass through
Enable PPTP pass
through on VPN
connection
Click the checkbox to enable PPTP packet pass through
Enable L2TP pass
through on VPN
connection
Click the checkbox to enable L2TP packet pass through
Set TTL value Click to Enable and set Time to Live value.