Filter
Top Products
10.9 WatchDog
This page is used to do watchdog function using ping command. User set IP address,
interval and ping fail count conditions to decide whether router reboots or not.
Parameter Description
Enable WatchDog
Click to enable watchdog.
WatchDog IP Address IP address that is referred.
Ping Interval Fill in the value by seconds.
Ping Fail to reboot Count Fill in the value that is the threshold to reboot router when
ping fails.
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.