Filter
Top Products
7
Chapter 2
Installation
This Chapter covers the physical installation of XRT-401B.
Requirements
• DSL or Cable modem, and an Internet Access account with an ISP, for shared
Internet resouces.
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45
connectors
• TCP/IP network protocol must be installed on all PCs.
Procedure
Figure 2-1: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install XRT-401B.
Ensure XRT-401B and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
• Use standard LAN cables to connect PCs to the Switching Hub ports on XRT-
401B. Both 10BaseT and 100BaseT connections can be used simultaneously.
• If required, use a standard LAN cable to connect the "Uplink" port to a standard
port on another hub.
Note: If the "Uplink" port is used, port 4 can NOT be used.
2