Filter
Top Products
PC Configuration
13
Fixed IP for WAN
If your ISP has assigned your home a static IP address (See Appendix A About Static
and Dynamic IP Address), you may connect to the Internet by using a fixed, or static
address. To set up a Fixed IP for WAN, do the following steps as an example.
Step 1 Choose “YES” when you see the question: (See Figure 3-1 Cable/DSL Setup
Menu).
Has your Internet Service Provider given you static IP address?
Then select ” Fixed IP”.
Step 2 Enter the information of IP Address, Subnet Mask and Default Gateway as
required. Then click the “NEXT” button. You should obtain above information from
your ISP. If not, contact your ISP.
Figure 3-5 Cable/DSL Setup Menu
Step 3 Enter the DNS Address. (See Figure 3-6 DNS Menu Screen) Your ISP should
provide you with at least one DNS IP Address. If not, contact your ISP.
Figure 3-6 DNS Setup Menu