Filter
Top Products
Broadband Router User Guide
36
This function is generally used to set up a web server, ftp server, or e-mail server on
your network. Figure 3-28 shows the screen of Virtual Servers Menu. If you had set
Alias IP for WAN, Figure 3-29 shows the screen of Virtual Servers Menu.
To add a Virtual Server:
1. Select the Profile number used by the server.
2. Click on the “Name” column and enter the application name.
3. Select Enabled or Disabled to enable or disable the profile.
4. Enter the IP Address of the server that you want the Internet users to be able to
access.
5. Configure as many entries as you would like until all the link entries are filled.
6. Click the “Apply” button to save the settings.
Figure 6-6: Virtual Server Setting Screen
Application to Configure: You can choose one of 10 applications to configure.
Name: Enter the desired name in the column.
Status: Choose Enabled to enable it or Disabled to ignore.
IP Address: Set IP addresses to be detected by users.
WAN Address:
If more than one Alias Address is set in section 3.2.5 the Alias IP Setup, you can get
multiple WAN IP addresses to choose. The following screen will appear with a pull-
down column in WAN Address.