Filter
Top Products
Broadband Router User Guide
8
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on XRT-401B. Use the cable
supplied with your DSL/Cable modem. If no cable was supplied, use a standard
cable.
4. Power Up
• Power on the Cable or DSL modem.
• Connect the supplied power adapter to XRT-401B and power up.
Use only the power adapter provided. Using a different one may cause hardware
damage
5. Check the LEDs
• The LAN LED should flash in Orange, then turn Off. If it stays Orange, there is a
hardware error.
• For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the
PC is also ON.)
• The WAN LED should be ON.