Filter
Top Products
PC Configuration
23
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows settings.
Restart your PC to ensure it obtains an IP Address from XRT-401B.
Using a fixed IP Address ("Use the following IP Address")
• If your PC is already configured, do NOT change the settings on the screen
shown in Figure above, unless advised to do so by your network administrator.
• You can enter XRT-401B's IP address in the Default gateway field and click OK.
Your LAN administrator can advise you of the IP Address they assigned to XRT-
401B.
• If the DNS Server fields are empty, select Use the following DNS server
addresses, and enter the DNS address or addresses provided by your ISP, then
click OK.