Filter
Top Products
E – 3
Lamp Replacement
• Be sure to replace the lamp when the Status light comes on. If you
continue to use the lamp after 1000 hours of use, the lamp will
turn off.
• Allow
a minimum of one minute to elapse between turning the
lamp off and on. High voltage is applied to the lamp immediately
when the power is turned on. Therefore turning the power off and
quickly back on may shorten the life of your lamp and result in
damage to your Data projector.
Fire and Shock Precautions
• Ensure that there is sufficient ventilation and that vents are
unobstructed to prevent the buildup of heat inside your Data
projector. Allow at least 10cm (3 inches) of space between your
Data projector and a wall.
• Prevent foreign objects such as paper clips and bits of paper from
falling into your Data projector. Do not attempt to retrieve any
objects that might fall into your projector. Do not insert any metal
objects such as a wire or screwdriver into your Data projector. If
something should fall into your projector, disconnect it immedi-
ately and have the object removed by a qualified PLUS service
person.
• Do not place any liquids on top of your Data projector.
• Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
Carrying around
When carrying this device around, please use the carrying case that
comes with it and to protect the lens from scratches, always attach
the lens cap. Also, do not subject the projector main unit to strong
mechanical shock.
Table of contents
IMPORTANT SAFETY INFORMATION ................................... 2
Table of contents ........................................................................... 3
Basic information and preparations ........ 4
About your UP-1100..................................................................... 4
Checking the supplied accessories ............................................... 4
Preparing the remote control ........................................................ 5
Parts and controls .......................................................................... 6
Installation..................................................................................... 9
Connections ............................................ 11
Connecting video equipment ...................................................... 11
Connecting a PC or Macintosh ................................................... 12
Using the remote control as a computer mouse
–Wireless mouse function........................................................... 14
Additional connections ............................................................... 15
Operation ................................................. 16
Using the Data Projector............................................................. 16
Various functions while using the Data Projector ...................... 19
Menu operation ....................................... 21
Basic operation (Selecting the input source).............................. 21
Menu structure ............................................................................ 22
Selecting the projection type ...................................................... 24
Selecting a display language....................................................... 24
Adjusting the volume .................................................................. 24
Selecting the background............................................................ 24
Setting “INPUT MODE” to “YCbCr” ....................................... 24
Adjusting the image from the source connected to the RGB IN
connector ..................................................................................... 25
Adjusting the picture elements ................................................... 27
Selecting the picture type ........................................................... 28
Selecting the wide screen display............................................... 28
Activating the power saving function......................................... 28
Quick starting the unit ................................................................ 28
Activating the on-screen function............................................... 29
Checking hours of lamp use ....................................................... 29
Resetting all to the factory settings ............................................ 29
Others ....................................................... 30
Troubleshooting .......................................................................... 30
When the STATUS indicator lights or blinks ............................. 31
Replacing the lamp housing ....................................................... 32
Specifications .............................................................................. 33