Polycom DOC2232A Server User Manual


 
Chapter 2 - Hardware Description and Installation
2-7
To save the values and reset the system, use the left/right ( / ) buttons to
select OK, and then press the Select ( ) button.
Alternatively, to return to the Main Menu without saving changes, use the
left/right ( / ) buttons to select Cancel, and then press the Select ()
button.
System Reset
The System Reset function is available from the Main Menu.
To reset the system, use the arrow buttons to select OK, and then press the
Select ( ) button.
To cancel, use the arrow buttons to select Cancel, and then press the Select
( ) button.
Manual System Reset
You can reset the system manually at any time by holding down the left ()
and right ( ) buttons simultaneously.
The OK option appears only if a component has been modified.
When the cursor is on the first component of the IP address, you can press the
left arrow button to access the OK and Cancel options.