Polycom DOC2579D Server User Manual


 
Chapter 3- Audio Only Basic Configuration and Operation
3-36
Type The network communication protocol used by the
endpoint to connect to the conference: H.323, SIP or
ISDN/PSTN.
The fields in the dialog box change according to the
selected network type.
IP Address
(H.323 and SIP
Only)
Enter the IP address of the participant’s endpoint.
For H.323 participant define either the endpoint
IP address or alias.
For SIP participant define either the endpoint IP
address or the SIP address.
Note: This field is hidden when the ISDN/PSTN
protocol is selected.
Phone Number
(ISDN/PSTN
Only)
Enter the phone number of the ISDN/PSTN
participant.
Note: This field is only displayed when the ISDN/
PSTN protocol is selected.
Alias Name/Type
(H.323 Only)
If you are using the endpoint’s alias and not the IP
address, first select the type of alias and then enter
the endpoint’s alias:
H.323 ID (alphanumeric ID)
E.164 (digits 0-9, * and #)
Email ID (email address format,
e.g. abc@example.com)
Participant Number (digits 0-9, * and #
Note:
Although all types are supported, the type of alias
is dependent on the gatekeeper’s capabilities. The
most commonly supported alias types are H.323
ID and E.164.
This field is used to enter the Entry Queue ID,
target Conference ID and Conference Password
when defining a cascaded link.
This field is removed from the dialog box when the
ISDN/PSTN protocol is selected.
Table 3-6 New Participant – General Properties (Continued)
Field Description