Polycom DOC2579D Server User Manual


 
Chapter 2-First Time Installation and Configuration
2-36
The Phones dialog box opens.
23 Click Add to define dial-in number ranges.
The Add Phone Number dialog box opens.
24 Define the following parameters:
25 Click OK.
The new range is added to the Dial-in Phone Numbers table.
26 Optional. Repeat steps 23 to 24 to define additional dial-in ranges.
27 In the Phones tab enter the MCU CLI (Calling Line Identification).
Table 2-12 Fast Configuration Wizard – Add Phone Numbers
Field Description
First Number The first number in the phone number range.
Last Number The last number in the phone number range.
A range must include at least two dial-in numbers.
A range cannot exceed 1000 numbers.