Filter
Top Products
5
Po werware 9315 Maintenance Bypass Module 30---160kV A
164201177 Rev. C 041500
Getting Started
This section describes ho w to install the Powerware 9315 Maintenance
Bypass Module (MBM). It contains instructions for installing the MBM and
basic site preparation procedures. Figure 2 shows the front and side view of the
MBM with or without transformer for a Powerware 9315 30---160kVA module.
The MBM is shipped as a separate item. Use a f orklift or pallet jack to move the
packaged cabinet to the installation site, or as close as possible to the site, before
unloading.
The basic sequence of the installation steps is:
1. Prepare the site for the MBM installation.
2. Inspect, unpack, and unload the MBM.
3. Create an installation plan for wiring the MBM to the UPS system.
4. Prepare for wiring.
5. Compl ete the install ation checkl ist from the PowerwareR 9315 I nstallation m anual.
6. Have authorized service personnel perform preliminary checks and startup.
NOTE: Startup a nd operational checks should b e performed only by authorized
service personnel. This service is usually offered as part of the sales
contract for your UPS system.
Figure 2. Front and Side View of Typical Maintenance Bypass Module on
Ship p ing Pallet (30---160kVA with or without XFMR)