Filter
Top Products
42
Chapter 2 Configuring The ANSI Emulation
Terminate Loading of Data
ASCII Code ESC \
Hex Code 1B 5C
Dec Code 27 92
Expression CHR$(27);“\”;
Purpose Terminates the loading of EVFU tables (described in Chapter 3)
and the downloading of dot graphics strings.
Vertical Position Absolute
ASCII Code ESC [p1 d
Hex Code 1B 5B p1 64
Dec Code 27 91 p1 100
Expression CHR$(27);“[p1d”;
Purpose Line terminator. Sets vertical position to specified p1 value in
decipoints, moving paper forward or backward to the new
position. Can be used to print inside top and bottom margins.
The specified position must be set within the current page;
otherwise, the command will be ignored. If the parameter value
is omitted, is less than five decipoints, or is greater than 15,840
decipoints, the vertical position will move to the top-of-form
position.
Vertical Position Relative
ASCII Code ESC [p1 e
Hex Code 1B 5B p1 65
Dec Code 27 91 p1 101
Expression CHR$(27);“[p1e”;
Purpose Line terminator. Moves the current vertical position by the
specified p1 number of decipoints as shown in Table 9.
Table 9. Vertical Position
Decipoint Value Movement in Inches
missing or 0-4 no movement
5-9 1/144 inch
10-14 2/144 inch
15-19 3/144 inch
...
15, 840 or greater
...
22 inches