Filter
Top Products
Chapter 5: Management with WebPAM PRO
103
Managing the Host
The Host is designated by its IP address:127.0.0.1. Host functions include:
• Viewing Host Information (page 103)
• Setting User Rights (page 103)
• Refreshing the WebPAM PRO Screen (page 103)
Viewing Host Information
To view Host information, click the 127.0.0.1 icon in Tree View. In the
Information tab, the following information appears:
• Management Port IP address (refers to the Host PC)
• Model of the RAID controller
• Alias of the RAID controller
• Firmware Version of the RAID controller
• Interface of the RAID controller
• World Wide Number of the RAID controller
Setting User Rights
User rights is the same function as user privilege. To set user rights:
1. Click the 127.0.0.1 icon in Tree View.
2. Click the User Rights tab.
3. Beside the name of the user whose privilege you want to change, choose
the privilege level from the Privilege dropdown menu.
For definitions of each privilege level, see “List of User Privileges” on
page 94.
4. Click the Submit button.
You can also set user privilege under User settings. See “Making User Settings”
on page 92
Refreshing the WebPAM PRO Screen
Unlike clicking browser’s refresh button, this function calls new information from
the RAID controller’s firmware to update the screen. To refresh the screen:
1. Click the 127.0.0.1 icon in Tree View.
2. Click he Refresh tab.
3. Click the Submit button.
4. Click the OK button in the confirmation box.