Filter
Top Products
Chapter 5: Management with WebPAM PRO
105
1. In Tree View, click the Subsystem icon.
2. In Management View, click the Information tab.
3. Click the Clear Statistics link.
4. Click the Submit button.
5. In the Confirmation dialog box, type confirm and click the OK button.
Setting an Alias for the Subsystem
An alias is optional. To set an alias for this subsystem or host:
1. In Tree View, click the Subsystem icon.
2. In Management View, click the Settings tab.
3. Enter a name into the Alias field.
Maximum of 48 characters. Use letters, numbers, one space between
words, and underscore.
4. Click the Submit button.
Updating the Firmware
Use this function to update the firmware and BIOS on the SuperTrak controller
card. You must first download the update file and save it to the Host PC.
Note that this function does not update the software driver. Install the software
driver file following the procedure for your operating system.
To upgrade the firmware and BIOS on the SuperTrak controller card:
1. In Tree View, click the Subsystem icon.
2. In Management View, click the Firmware Update tab dropdown menu and
choose Download From Local File.
3. Click the Browse button.
4. Navigate to the directory where you saved the upgrade file, then click the
upgrade file, and click the Open button.
5. Click the Submit button.
When the Flash Image Status shows Flash image completed, the firmware
and BIOS have been updated.
6. Restart the Host PC.
Cautions
• Before you begin, backup any important or useful data.
• Do NOT power off your PC during the procedure.