Filter
Top Products
Chapter 5: Configuration
Active Conn. Tab
110 Psion Teklogix NEO Hand-Held Computer User Manual
5.6.5 Active Conn. Tab
The Active Conn tab lists the Name, Address, and Type of the currently active connections.
The table is periodically updated, but it can take a few seconds before it reflects the actual
list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection
list table shows the connections for scanning as well as the service connections.
Note: You can change the device-name and description of your radio by clicking on the
System icon in Control Panel, which will open the System Properties dialog box.
Click on the Device Name tab to access the menu and change your settings. Then
click on OK.
Although the name will have changed in the Properties menu in Bluetooth Controls,
the radio only reads it on boot-up. For the changes to take effect, you must reset
NEO (for reset instructions, see “Resetting NEO” on page 20).