Filter
Top Products
Chapter 3: Getting To Know NEO
Audio Indicators
Psion Teklogix NEO Hand-Held Computer User Manual 37
Keep in mind that the application running on NEO can dictate how the LED operates.
Review the documentation provided with your application to determine LED behaviour.
The scanner also overrides LED behaviour. The table below describes what the various LED
colours indicator when a scan is activated – a scanner button is pressed or the scanner trigger
is pulled.
If the unit is attached to an external power supply, the hand-held LED reflects the battery
charge status.
3.6.2 Audio Indicators
The audio receiver provides a variety of sounds when a key is pressed, a keyboard character
is rejected, scan input is accepted or rejected, an operator’s entry does not match in a match
field or the battery is low. To specify how you want your NEO to respond under various con-
ditions, refer to “Volume And Sound Properties” on page 90.
Table 3.1 NEO Scanner LED Behaviour
LED Behaviour Scan Status
Solid Red Indicates the scanner is firing.
Blinking Red Unsuccessful decode.
Solid Green Successful decode.
Note: During the first two minutes of a battery charge, the LED remains solid yellow
while the hand-held computer status is assessed.
Table 3.2 NEO Charge LED Behaviour
LED Behaviour Charge Status
Solid Yellow Battery charged to less than 75% capacity.
Flashing Green Battery charged to between 75% and 95% of capacity.
Solid Green Fully charged.
Flashing Yellow Temperature outside charge range (0°C to 45°C).
Solid Red Battery is not charging. Battery fault warning.