Filter
Top Products
Chapter 2: Basic Checkout
Using Microsoft Vista
24 Psion Teklogix NEO Hand-Held Computer User Manual
2.6.2 Using Microsoft Vista
If you have Windows Vista, your NEO data transfers do not require ActiveSync. To transfer
data between your PC and your hand-held:
• Tap on Start>Computer to display the drives. Your NEO will be visible here.
• Open drives, files and folders as you would on your PC.
2.7 Resetting NEO
2.7.1 Performing A Warm Reset
When you perform a warm reset, the operating system restarts without clearing the object
store memory where the file system resides. Registry settings, installed programs and any
data files are preserved. Any open applications are closed and any unsaved data are lost.
To execute a warm reset:
• Press and hold down the [FN/BLUE] key and the [ENTER] key simultaneously for a
minimum of six seconds.
2.7.2 Performing A Cold Reset
A cold reset clears the object store memory and restarts the operating system. Registry set-
tings are maintained, but any data and applications that are not stored in the Flash file system
– called Flash Disk on NEO – or on a microSD card are lost. This should be used as a last
resort if NEO cannot be reset using any other method.
To execute a cold reset and launch the Windows CE 5.0 operating system (bypassing the
boot menu):
• Press and hold down the [FN/BLUE] [FN/ORANGE] and [ENTER] keys simultane-
ously for a minimum of six seconds.
Note: You do not need to reset your NEO after configuring the radio.
Note: Cold reset is only listed in the Shutdown menu if the security level of the hand-held is
set to Supervisor or Teklogix.