Filter
Top Products
B – Command Line Interface
Passwd Command
59021-04 C B-15
Q
Passwd Command
Changes a user account’s password.
Authority Admin to change another account’s password; User to change your own.
Syntax passwd [account_name]
Keywords [account_name]
The user account name. You must open an admin session to change the
password for an account name other than your own. If you omit [account_name],
you will be prompted to change the password for the current account name.
Examples The following is an example of the Passwd command:
SANbox2 (admin) #> passwd user2
Press 'q' and the ENTER key to abort this command.
account OLD password :
account NEW password (4-20 chars) :
please confirm account NEW password:
password has been changed.