Filter
Top Products
4 – Installation
Installing a Switch
59021-04 C 4-13
Q
3. On the SANbox Switch Software page, scroll to the SANbox2-16 (2Gb)
Series area.
4. In the Solaris column, choose the SANbox Manager link to open the Save
As window.
5. Enter a path name to save the sansurfer_solaris_install.bin file and
choose the Save button.
6. Open a terminal window for the directory in which the
sansurfer_solaris_install.bin file was saved, and enter the following
command:
chmod +x sansurfer_solaris_install.bin
7. Press the Enter key.
8. Enter the following command and follow the SANbox Manager installation
instructions:
./sansurfer_solaris_install.bin
4.2.6
Configure the Switch
Do the following to configure a switch using the SANbox Manager application.
Refer to the SANbox2-8c/16 Switch Management User’s Guide for more
information about configuring a switch. You can also configure the switch using
the Command Line Interface. Refer to Appendix B Command Line Interface for
more information.
1. Connect to the switch using an Ethernet connection and run SANbox
Manager.
2. Open the Fabric menu and select Add Fabric to open the Add a New Fabric
window.
3. Enter a fabric name and the IP address of the switch through which to
manage the fabric. The default IP address is 10.0.0.1. If this is a new switch,
leave the login name and password fields empty, and choose the Add
Fabric button. By default, fabric security is disabled, and therefore account
names and passwords are not enforced. Refer to the ”Set Setup Command”
on page B-37 for information about setting fabric security.
4. Open the Switch menu and select Switch Properties. In the Switch
Properties window, enter a chassis name. Accept the default domain ID, and
choose the OK button.
Note: If you download SANbox Manager from a server, be sure the
downloaded file has execute permission before installing.