Filter
Top Products
B – Command Line Interface
Set Config Command
59021-04 C B-27
Q
switch
Initiates an editing session in which to change switch configuration settings. The
system displays each parameter one line at a time and prompts you for a value.
For each parameter, enter a new value or press the Enter key to accept the
current value shown in brackets.
Table B-8. Set Config Switch Parameters
Parameter Description
AdminState Switch administrative state: online,
offline, or diagnostics
Broadcast Enable Enables (True) or disables (False)
forwarding of broadcast frames.
InbandEnabled Enables (True) or disables (False) the
ability to manage the switch over an
ISL.
DefaultDomainID Default domain ID setting
DomainIDLock Prevents (True) or allows (False)
dynamic reassignment of the
domain ID.
SymbolicName Descriptive name
R_T_TOV Receiver Transmitter Timeout Value.
Specifies the number of milliseconds a
port is to wait to receive a response
from another port. The default is 100.
R_A_TOV Resource Allocation Timeout Value.
The number of milliseconds the switch
waits to allow two ports to allocate
enough resources to establish a link.
The default is 10000.
E_D_TOV Error Detect Timeout Value. The
number of milliseconds a port is to wait
for errors to clear. The default is 2000.
FS_TOV Fabric Stability Timeout Value. The
default is 5000 msec.
DS_TOV Distributed Services Timeout Value
(Management Server, Name Server).
The default is 5000 msec.