B – Command Line Interface
Show Command
59021-04 C B-47
Q
The following is an example of the Show Fabric command:
SANbox2 #> show fabric
Switch ID WWN Eth0IPAddress SymbolicName
------ -- --- ------------- ------------
1 (0x1) fffc01 10:00:00:c0:dd:00:bd:ec 10.20.68.107
4 (0x4) fffc04 10:00:00:c0:dd:00:80:21 10.20.68.14
The following is an example of the Show NS (local domain) command:
SANbox2 #> show ns
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 99 (0x63) 630425 NL 3 21:00:00:20:37:d9:4b:2a 20:00:00:20:37:d9:4b:2a
2 99 (0x63) 6304e8 NL 3 21:00:00:20:37:d9:4b:2f 20:00:00:20:37:d9:4b:2f
3 99 (0x63) 6304ef NL 3 21:00:00:20:37:d9:4f:46 20:00:00:20:37:d9:4f:46
The following is an example of the Show NS Domain_ID command:
SANbox2 #> show ns domain_ID
Port ID: 630425
--------
PortType NL
PortWWN 21:00:00:20:37:d9:4b:2a
SymbolicPortName
NodeWWN 20:00:00:20:37:d9:4b:2a
SymbolicNodeName
NodeIPAddress 0.0.0.0
ClassOfService 3
PortIPAddress 0.0.0.0
FabricPortName 20:04:00:c0:dd:00:b7:ea
FC4Type FCP
FC4Desc SEAGATE ST318304FC (Rev. 0005)