Q-Logic 59021-05 B Switch User Manual


 
B – Command Line Interface
Set Config Command
59021-05 B B-27
Q
DeviceScanEnabled Enables (True) or disables (False) the scanning of the
connected device for FC-4 descriptor information during
login. The default is True.
ForceOfflineRSCN Enables (False) or disables (True) the immediate
transmission of RSCN messages when communication
between a port and its device is interrupted. If enabled, the
RSCN message is queued for 200 ms. The default is
False. This parameter is ignored if IOStreamGuard is
enabled.
ARB_FF Use ARB_FF instead of idles on loop FCAL option
InteropCredit Interoperability credit. The number of buffer-to-buffer
credits per port. 0 means the default (12) is unchanged.
ExtCredit Extended credits. The number of port buffer credits that
this port can acquire from donor ports.
FANEnable Fabric address notification. Enables (True) or disables
(False) the communication of the FL_Port address, port
name, and node name to the logged-in NL_Port.
LCFEnable Link control frame preference, R_CTL = 0xC
MFS_TOV MFS limit for camp on
MFSEnable Multi-Frame Sequence bundling
MSEnable Management Server enable on this port
NoClose Don't close unless another device arbitrates
IOStreamGuard Enables or disables the suppression of RSCN messages
VIEnable Enable VI preference routing
CheckAlps Close before sending frames to new target
Table B-7. Set Config Port Parameters (Continued)
Parameter Description