4 – Installation
Installing a Switch
4-4 59021-05 B
Q
Ensure that the19-inch rack meets the following standard specifications:
ANSI/EIA RS-230 Standard, entitled Cabinets, Racks, Panels, and
Associated Equipment
MIL-STD- 189, entitled Racks, Electrical Equipment, 19-Inch and Associated
Panels
The brackets shown in Figure 4-2 are provided with the switch so that the switch
can be secured in a shelf. The brackets alone are not designed to support the
weight of the switch.
Figure 4-2. Installing Rack Mount Brackets
4.2.2
Install SFP Transceivers
The switch will support a variety of interconnection media. Refer to ”SFP
Transceivers” on page 6-2 for information about removing and installing SFP
transceivers.