Q-Logic 59021-05 B Switch User Manual


 
B – Command Line Interface
Show Command
59021-05 B B-49
Q
The following is an example of the Show NS (local domain) command:
SANbox2 #> show ns
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 99 (0x63) 630425 NL 3 21:00:00:20:37:d9:4b:2a 20:00:00:20:37:d9:4b:2a
2 99 (0x63) 6304e8 NL 3 21:00:00:20:37:d9:4b:2f 20:00:00:20:37:d9:4b:2f
3 99 (0x63) 6304ef NL 3 21:00:00:20:37:d9:4f:46 20:00:00:20:37:d9:4f:46
The following is an example of the Show NS Domain_ID command:
SANbox2-32 #> show ns 102
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 102 (0x66) 6606dc NL 3 21:00:00:20:37:19:1f:7c 20:00:00:20:37:19:1f:7c
2 102 (0x66) 6606e0 NL 3 21:00:00:20:37:19:1d:c8 20:00:00:20:37:19:1d:c8
3 102 (0x66) 6606e1 NL 3 21:00:00:20:37:19:1d:33 20:00:00:20:37:19:1d:33
4 102 (0x66) 6606e2 NL 3 21:00:00:20:37:19:1f:95 20:00:00:20:37:19:1f:95
5 102 (0x66) 6606e4 NL 3 21:00:00:20:37:19:1f:a5 20:00:00:20:37:19:1f:a5
6 102 (0x66) 6606e8 NL 3 21:00:00:20:37:19:1d:9b 20:00:00:20:37:19:1d:9b
7 102 (0x66) 6606ef NL 3 21:00:00:20:37:19:1f:90 20:00:00:20:37:19:1f:90
The following is an example of the Show Interface command:
SANbox2 #> show interface
eth0 Link encap:Ethernet HWaddr 00:C0:DD:00:BD:ED
inet addr:10.20.68.107 Bcast:10.20.68.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4712 errors:0 dropped:0 overruns:0 frame:0
TX packets:3000 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:415313 (405.5 Kb) TX bytes:716751 (699.9 Kb)
Interrupt:11 Base address:0xfcc0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:304 errors:0 dropped:0 overruns:0 frame:0
TX packets:304 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20116 (19.6 Kb) TX bytes:20116 (19.6 Kb)