2–Configuring NIC
Configuring PXE Boot
SN0054671-00 A 2-3
Configuring PXE Boot
This section provides procedures for configuring the 8200 and 3200 Series
Adapters to perform PXE boot. The example uses function 1 and NIC 1.
To configure PXE boot:
1. Enter the system BIOS by pressing the F2 key.
2. On the BIOS window (Figure 2-1), select Integrated Devices, and then
press the ENTER key.
Figure 2-1. Dell BIOS: Integrated Devices
3. Set the Embedded NIC1 and NIC2 option to Enabled.
4. Set the Embedded NIC1 option to Enabled with PXE.
5. Press the ESCAPE key twice, and then select Save changes and exit.
The system reboots.
6. (Optional) During POST, press the CTRL+Q keys to enter the QLogic 8200
Series / 3200 Series CNA Function Configuration window.