Q-Logic 8200 Network Cables User Manual


 
2–Configuring NIC
NIC Partition (NPAR)
SN0054671-00 A 2-39
Figures 2-19 shows the configuration range of the 8200 Series Adapters with
NPAR.
Figure 2-19. 8200 Series Configuration Range With NPAR
Figures 2-20 shows the Configuration Range of the 3200 Series Adapters with
NPAR. Physical functions 2–7 can be independently disabled.
Figure 2-20. 3200 Series Configuration Range With NPAR
To configure a physical function:
1. Select the function you want to change in the hierarchy on the left side of the
screen.
The Function Attributes on the right side of the screen reflect the selected
physical function.
2. Make a selection from the Function Type menu.
a. If the Function Type is NIC, iSCSI, or FCoE, select Disabled to disable
the function.
b. If the Function Type is Disabled, select the appropriate function type.