Filter
Top Products
98
Detailed Menu Reference
99
Detailed Menu Reference
GLOB
Parameter
Options Description
Clear Hits SEL Press SEL to clear all hit counters.
Hit Counts Yes or No Turns the hit counter feature on or off.
Dflt ScanList 0-22
Sets default destination Scan Lists for new
objects and CONV Stor from Searches,
Signal Stalker II, and Tune. Use 1-20 for
“normal” Scan Lists 1-20. Use 0 for the
“ns” (not scanned) Scan List (no Scan List
mappings are specified). Use 21 for the FAV
Scan List. Use 22 for the Skywarn Scan List.
Priority On or Off Turns Priority Scan On or Off. Priority Scan
can also be toggled by pressing FUNC PRI
while scanning.
WxPri On or Off Toggles Weather Priority Mode on or off.
Also accessed by pressing WX, then PRI.
Scan Lists SEL Enters sub menu for Scan List settings and
status.
SRCH L/Outs SEL Enters sub menu for review, editing or dele-
tion of search lockout frequencies.
Clear FAV SEL Press SEL to clear the Favorites Scan List.
Memory Info SEL Press SEL to see the current memory
usage.
EXPERT BELOW
Tune LED On or Off Activates Signal Strength driven LED when
in Tune mode.
Color 0-7 Red, Green, Blue
(RGB) value
Sets intensity of red, green and blue LEDs.
Press SEL to edit colors. Press to scroll
to R, G or B LED settings. Use numeric keys
to activate preset intensity levels for each
LED, or use keys to fine scroll intensity.
Qtxt 1-0 Text value Sets QTXT (QuickText) 0-9 text. Use “$” to
indicate end of text.
Key Repeat On or Off Toggles key repeat mode when a key is
held down.
GLOB
Parameter
Options Description
LCD BlinkOff 1-250 x 10 mS For alternating text displays, sets the
display time for the secondary display
element.
LCD BlinkOn 1-250 x 10 mS For alternating text displays, sets the dis-
play time for the primary display element.
LED BlinkOff 1-250 x 10 mS When the Alert LED setting for an object is
set to Flash, this is the amount of time the
LED stays turned off.
LED BlinkOn 1-250 x 10 mS When the Alert LED setting for an object is
set to Flash, this is the amount of time the
LED stays turned on.
Pri Channels 0-250 Number of priority CONV channels to
check during a priority scan sampling. “0”
samples all CONV priority channels.
Pri Interval 2-100 x 100 mS Conventional frequency priority sample
interval.
TGRP Pri Int On or Off Toggles priority interrupt scanning during
trunked calls.
QuickPriRtn On or Off When on, does not wait for verification of
correct CTCSS, DCS or NAC when return-
ing to an active CONV channel after priority
sampling
Search Delay 1-250 x 100 ms Sets wait for reply delay for all search
modes.
SRCH Dig AGC On or Off Sets digital AGC mode on or off for all
search types. Useful to compensate for low
or high digital audio levels caused at the
system.
SRCH SuprTrk On or Off Alternative DSP decoding algorithm is
applied to all search types. May help
reception on some systems.