Filter
Top Products
30
Operation
FINDING AND STORING ACTIVE
FREQUENCIES
You can search for transmissions in the scanner’s pre-
programmed search bank. The search bank is divided
into six search bands. You can change the search range
of Bank SR5 manually by setting the lower and higher
ends of the search range.
Notes:
• You can use the scanner's delay feature while
searching the search bank. See “Using the Delay
Function” on Page 42.
• The scanner does not search locked-out frequen-
cies while searching ranges. See “Locking Out
Channels or Frequencies” on Page 42.
Searching a Preprogrammed Frequency
Range
The scanner contains these preprogrammed search
ranges, stored in the search bank (SR0 – SR5).
Bank Band
SR0 ..................................................................... Marine
SR1 ........................................................................... CB
SR2 ............................................................... Police/Fire
SR3 ..................................................................... Aircraft
SR4 ......................................................................... Ham
SR5 ............................... Limit search (User changeable)
To select preprogrammed search bands and search
them for active frequencies: