Filter
Top Products
45
Special Features
teresting transmission on a specific channel. When
priority is turned on, the scanner checks that channel ev-
ery 2 seconds, and stays on the channel if there is activ-
ity until the activity stops.
Notes:
• The priority feature does not operate while the scan-
ner receives trunking (voice channel) frequencies.
• If you program a weather channel as the priority
channel, the scanner stays in the priority channel
only when the scanner detects the weather alert
tone.
To program a frequency in the priority channel:
1. Press
MANUAL
.
2. Use the number keys to enter the channel number
which contains the frequency you want to program
as the priority channel. Then press
MANUAL
again.
3. Press
FUNC
then
PRI
.
,
,,
,I@ý á
I@ý áI@ý á
I@ý á?8EE<C
?8EE<C?8EE<C
?8EE<C
blinks on the
bottom line.
To program the priority channel directly:
1. Press
PGM
.
2. Press
PRI
.
3. Enter the frequency you want to enter into the prior-
ity channel, then press
ENTER
.
Note:
This scanner cannot set a channel as the priority
channel if the channel's receive mode is MOT or ED.
To program a weather channel as the priority channel:
1. Press
WX
.
2. Select the weather channel you want to program as
the priority channel.
3. Press
FUNC
then
PRI
.
,
,,
,I@ý á
I@ýáI@ýá
I@ýá?8EE<C
?8EE<C?8EE<C
?8EE<C
flashes on the
bottom line two times.