Filter
Top Products
56
Trunking Operation
• On the 900 MHz trunking band, you do not need to
set the base frequency (base, offset, step).
Follow these steps to program 800 MHz band Motorola
trunking.
1. Press
PGM
then
TRUNK
to enter the ID program
mode.
2. Press
FUNC
then
8
88
8
or
9
99
9
to select the desired
bank.
3. Press
MODE
and select Motorola trunking mode.
4. Press
FUNC
then
3.
1J<ý 1Gó FNEý B<PJý KFý J<K
1J<ý 1Gó FNEý B<PJý KFý J<K1J<ý 1Gó FNEý B<PJý KFý J<K
1J<ý 1Gó FNEý B<PJý KFý J<K
êòò)$Qý98J<ôý*FID8C
êòò)$Qý98J<ôý*FID8Cêòò)$Qý98J<ôý*FID8C
êòò)$Qý98J<ôý*FID8C
appears.
5. Press
8
88
8
or
9
99
9
to select
*FID8C
*FID8C*FID8C
*FID8C
or
+==J<K
+==J<K+==J<K
+==J<K
and
press
ENTER
.
• If you are uncertain about the base frequency, use
the default setting. The default setting is
*FID8C
*FID8C*FID8C
*FID8C
.
• If you cannot receive with the
*FID8C
*FID8C*FID8C
*FID8C
setting,
change to
+==J<K
+==J<K+==J<K
+==J<K
. The base frequency in
*FID8C
*FID8C*FID8C
*FID8C
is
851.0125 MHz. The base frequency in
+==J<K
+==J<K+==J<K
+==J<K
is
851.0000 MHz.
Programming Fleet Maps
You must set the fleet map if you want to receive a Mo-
torola Type I system. Fleet maps are included along with
other information about Motorola Type I systems at
www.trunkscanner.com
.
Follow these steps to program a fleet map.
1. Press
PGM
then
TRUNK
.
2. For each bank you want to program, repeatedly
press
FUNC
, then
8
88
8
or
9
99
9
to select the bank.
3. Press
FUNC
.