Filter
Top Products
61
Trunking Operation
Turning an ID Sub-Bank On or Off
Follow these steps to turn the ID sub-bank on or off dur-
ing the program mode:
1. Press
TRUNK
repeatedly to select the desired sub-
bank.
2. Press
FUNC
then
1
to turn the sub-bank on if it is off
or off if it is on.
Follow these steps to turn the ID sub-bank on or off dur-
ing the scan mode:
1. Press
FUNC
while the scanner is stopped on a voice
channel transmission.
2. Press
TRUNK
. The display indicates which sub-bank
is turned on or off, and the active sub-bank number
flashes.
3. Press
FUNC
and the number of the sub-bank you
desire to turn on or off. For example to turn sub-
bank 4 on or off, press
FUNC
then
4
.
Locking Out Talk Group IDs
Note:
You can only lock out talk group IDs when the
scanner is in the closed mode (see “Open and Closed
Modes” on Page 63).
1. Press
PGM
.
2. Press
TRUNK
.
3. Press
FUNC
,
8
88
8
or
9
99
9
to move to the desired bank.
4. Press
8
88
8
or
9
99
9
to select the ID memory.
5. Press
L/OUT
to lock out the ID.
Bý
BýBý
Bý
appears.
6. To remove the lockout from a trunking ID, manually
select the ID memory, and press
L/OUT
until
(
((
(ý
ýý
ý
disap-
pears.
You can confirm the ID code while the scanner shows
the text when the received signal is a voice channel.