Filter
Top Products
22
Connections & Setup
Set the VCR2 Channel (auto tuning)
You can set the VCR2 button on the remote to automatically tune to an
input channel as well. If you don’t have a VCR2 component connected to
the monitor, skip this step.
1. From the CHANNEL menu (shown below), select Auto Tuning.
CHANNEL
1 Signal Type
2
Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Go Back
2. From the AUTO TUNING menu (shown below), select Set VCR2
Channel.
AUTO TUNING
1 Set VCR1 Channel...
2 Set VCR2 Channel...
3 Set DVD Channel...
4 Set SAT/CABLE Channel...
0 Go Back
3. From the SET VCR2 CHANNEL menu (shown below), point to the
choice in the that matches the way you have your VCR connected to
the monitor.
SET VCR2 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
6 Video 3 Input
4. Press OK to select it.