Renesas M16C/6V Network Card User Manual


 
( 3 / 48 )
Preface
The M306V0T-RPD-E is an emulation pod for the M16C/6V group of Renesas 16-bit MCUs. The
M306V0T-RPD-E is used by being connected to the PC4701 emulator (PC4701HS, PC4701L,
PC4700H or PC4700L) and is controlled by the emulator debugger.
This manual mainly explains specifications and setting up of the M306V0T-RPD-E. For detail
information about the PC4701 emulator and the emulator debugger, refer to each user's manual.
To check the components of this product, refer to "Things to Check When Unpacking" in this manual.
If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety
In both this user's manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
When using outside Japan
When using in Europe, the United States, or Canada, be sure to use both the emulator
and the emulation pod which meet local standards. EMI standards are not met when
this product is used with the PC4700H or PC4700L emulator.