Ricoh 161F All in One Printer User Manual


 
Fax Destination
163
7
Fax Destination
Register a fax destination so you do not need to enter fax numbers each time, and
can send documents that have been scanned in using the fax function.
It is easy to select the fax destination if you register "Name" for the fax desti-
nation.
You can register fax destinations by selecting them from redial function.
Registered Fax numbers can be used as sender's Fax numbers.
There are two types of fax destination, as shown below:
•Fax Number
Select this to send the fax over the telephone network.
•IP-Fax Destination
Select this to send the fax to a machine on a TCP/IP network. You cannot send
the fax to a machine on another network if that network is behind a firewall.
You can program the following items in a fax destination:
Fax number
Registers the destination's fax number. You can enter a fax number using up
to 128 digits. You must include every digit in the number.
SUB Code
Registering a SUB Code allows you to use Confidential Transmission to send
messages to the other fax machines which support a similar function called
"SUB Code". See "Setting SUB Codes for Transmission", Facsimile Reference.
SEP Code
Registering a SEP Code allows you to use Polling Reception to receive faxes
from the other fax machines which support Polling Reception. See "Setting
SEP Codes for Reception", Facsimile Reference.
International TX Mode
When setting the International TX mode to [On], the machine transmits more
carefully by lowering transmission speed. However, communication times
increase.