Filter
Top Products
System Settings
46
2
Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Default settings are shown in bold type.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
❖ Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [IP Add.] and [Subnet M] as "xxx.xxx.xxx.xxx"("x"
indicates a number).
•Auto-Obtain (DHCP)
•Specify
IPv4 Address: 011.022.033.044
Sub-net Mask: 000.000.000.000
The default setting is Specify.
The default setting for IPv4 Address is 011.022.033.044.
When you select [Specify], make sure that [IP Add.] is different from that of an-
other machines on the network.
The physical address (MAC address) also appears.
❖ IPv4 Gateway Address
A gateway is a connection or interchange point between two networks.
Specify the gateway address for the router or host computer used as a gate-
way.
The default setting is 000.000.000.000.
❖ Machine IPv6 Address
Specify the machine's IPv6 network address.
• Link-local Address
The machine's specified link-local address appears.
• Manual Config. Address
The machine's manually configuration address appears.
• Stateless address: 1-5
The specified stateless address appears.
❖ IPv6 Gateway Address
Displays the machine's IPv6 gateway address appears.
❖ IPv6 Stateless Setting
Specify IPv6 Stateless Setting.
The default setting is Active.