Filter
Top Products
System Settings
44
2
Timer Settings
This section describes the user tools in the Timer Settings menu under System
Settings.
Default settings are shown in bold type.
❖ Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
"Auto Off".
The machine status after the Auto Off operation is referred to as "Off mode"
or "Sleep mode". Use this setting to specify how long the machine remains
idle before switching to "Off mode" or "Sleep mode".
This function can only be specified if AOF is specified to [On].
The time can be set from 1 min. to 240 min, using the number keys.
The default setting is 1 min..
From "Off mode" or "Sleep mode", the machine is ready to use within 10 sec-
onds.
Auto Off might not work if an error message is being displayed at the time
scheduled for the switch.
❖ Energy Saver Timer
The machine automatically enters Low Power mode automatically after a job
is finished, and the selected time elapsed.
The time can be set from 1 to 240 minutes, using the number key.
The default setting is 15 min..
Energy Saver may not work when error messages appear.
The machine automatically prints any fax or printer data received while in
Energy Saver mode.
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority, when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
The default setting is On.
The time can be set from 10 to 999 seconds in 1 second increments, using the
number keys.
The default setting time is 60 sec..
❖ Copier Auto Reset Timer (copier)
Specifies the time to elapse before copier mode resets.
The default setting is On.
If [Off] is selected, the machine does not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting time is 60 sec..