Ricoh 161SPF All in One Printer User Manual


 
Connecting to the Interfaces
11
1
Connecting to the IEEE 1284 Interface
This section describes how to connect the IEEE 1284 interface cable to the IEEE
1284 interface board.
A Make sure the main power switch on the machine is off.
If the main power switch is on, turn it off.
B Turn off the main power switch of the host computer.
C Connect the IEEE 1284 interface cable to the IEEE 1284 port.
D Connect the other end of the cable into the interface connector on the host
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
E Turn on the main power switch of the machine.
F Turn on the host computer.
When using Windows 95/98/Me/2000/XP and Windows Server 2003, a
printer driver installation screen might appear when the computer is turned
on. If this happens, click [Cancel] on the screen.
Note
For details about installing the printer driver, see "Preparing the Machine",
Printer Reference.
Reference
"Turning On the Power" About This Machine
"Preparing the Machine", Printer Reference
ARH003S