Filter
Top Products
146
Designating Areas
Right Angle Polygon and Polygon
1
Set your original on the exposure glass.
2
Press the [Area Editing] key.
3
Press the (R.A. Polygon) or (Polygon)
key.
4
Mark the first point with the editor pen.
5
Mark the next points.
Note
❐ When you use Right Angle Polygon mode, mark
points that make right angles.
6
After making the last point, press the [Confirm
Selection] key.
7
Press the [Area Edit] key, specify your settings,
then press the [OK] key.
Reference
For details, ☛ see page 152.
8
Press the Start key.
Closed Loop
Limitation
❐ If you specify an area with Closed Loop, you cannot specify any additional areas with other selection tools.
Note
❐ When you color areas with the Closed Loop, the area boundary may shift depending on the image.
1
Set your original on the exposure glass.
2
Press the [Area Editing] key.
3
Press the (Closed Loop) key.
4
Touch on a point inside a closed loop.