Filter
Top Products
33
Basics
Setting one Original at a Time in the Document Feeder
If you set one original at a time in the document feeder, the second and subsequent originals can be fed and
copied automatically without pressing the Start key.
Note
❐ Do not press down or hold originals after inserting them.
❐ While originals are fed from the original table to the exposure glass (platen glass), do not pull them out.
❐ Do not lift the document feeder until the original has been completely fed out.
1
Correct any curl, fold, or crease in the originals
before setting.
2
Make sure the Insert Original indicator is lit and
the exposure glass (platen glass) is clear of origi-
nals.
3
Adjust the guide to the original size.
4
Set the original
face up
into the document feeder
until the Insert Original indicator goes off.
Note
❐ If you are copying a stack of originals one sheet at a
time and you want to keep them in order, start with
the last page of the originals.
❐ The original guide must touch the front side of the
original.
5
Press the Start key.
6
While the Auto Feed indicator is lit after an origi-
nal is fed, set the next original. The original is
automatically fed and copied.
Note
❐ You can adjust the time the machine waits before
being ready for the next original with the user tools.
☛ See page 191.
Setting one Original at a Time in the Document Feeder
TRSR050E