217
Projector Unit
Operation
Selecting the Base Film (If Needed)
Note
❐ When you use negative film for copying, use that film’s appropriate base film for shading.
1
Confirm the manufacture, model name, and ASA
rating of the film you want to use.
2
Select a base film suitable for the film to copy.
Note
❐ The following base film slides have been prepared as accessories.
• For FUJICOLOR (registered trademark of FUJI PHOTO COMPANY LIMITED.)
• For AGFA (registered trademark of AGFAGEVAERT AG.)
• For KODAK (registered trademark of EASTMAN KODAK COMPANY.)
❐ If you use film that does not have suitable base film, you should make the base film yourself. ☛ See page 234.
3
Open the film strip holder and set the base film
in the film strip holder.
Note
❐ The base film must be set sideways in the strip holder.
❐ There is no difference between both sides of the base
film.
4
Close the holder and lock it as shown in the il-
lustration.
Preparing the Film
TRSR0H0E
1
1: Base film