Ricoh 6110 Copier User Manual


 
224
35mm Strip Negative
1
Press the [Shading] key.
2
Insert the “N” (Negative) filter in the left slot as
shown in the illustration.
Note
Be careful to insert the filter as shown, not the other
way around.
Before going to the next step, make sure that the
fresnel lens is lowered in position.
3
Set the base film in the holder.
Reference
Regarding setting the base film, see page 217.
4
Open the film cover and while pressing the holder
lever to the left, insert film strip holder the right
slot.
5
Insert the holder until the mark is placed as
shown in the illustration.
6
Press the [Shading] key.
Note
The machine will start shading automatically.
TRSR0F0E
1
1: Filter
1: Holder lever
TRSR0J0E
1
Selecting the Film Type and Performing Shading