Filter
Top Products
177
What to do if Something
Goes Wrong
xClearing Misfeeds
R
CAUTION
n
• When removing misfed paper, do not touch the fusing section because it could be very
hot.
Note
❐ When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings are cleared.
❐ To prevent misfeeds, do not leave any torn scraps of paper within the machine.
❐ If paper misfeeds occur repeatedly, contact your service representative.
❐ When clearing misfeeds, make sure that all units and levers are returned to their original position and all covers are
closed.
❐ Do not touch originals in the document feeder when a paper misfeed occurs in the machine. If you do the machine
cannot determine which originals have been copied and which haven’t.
Check the Misfeed Location Display
The display shows the location of misfed paper.
xClearing Misfeeds
Clearing Paper Misfeeds
When A, B, C, D or Z is Displayed:
1
Open the front cover of the machine.
2
You can find the sticker (with b at the top) ex-
plaining how to remove misfed paper inside the
front cover as shown in the illustration.
3
Remove misfed paper following the instructions
on the sticker.