Filter
Top Products
196
User Tools
Description
When you designate areas, you can select the first designated shape.
1. Select the
(Rectangle), (R.A.Polygon), (Polygon), (Closed Loop), or
(Multi. Closed Loop) key.
Note
❐ Default: (Rectangle) key
You can assign user codes to each color mode. Operators must input their user codes
before using each color mode (Full color, Black & White, Single, Twin Color).
The machine keeps count of the number of copies made under each user code.
1. Select your desired color mode.
Program
You can register the user codes.
1. Press the [Program] key.
2. Enter the user code with the
Number keys. Then press the [#] key.
3. Select the color mode from [Full Color], [Black & White], [Single], or [Twin Color]
key.
Note
❐ You can up to 200 user codes.
Change
You can change the user codes.
1. Press the [Change] key.
2. Select the user code.
3. Enter the user code with the
Number keys. Then press the [#] key.
4. Select the color mode from [Full Color], [Black & White], [Single], or [Twin Color]
key.
Clear
You can clear the user codes.
1. Press the [Clear] key.
2. Select the user code that you want to clear.
3. If you want to clear the all user codes of the page, press the [Select All] key.
Note
If you want to change the [Select All], press the [Clr All Select] key.
4. Press the [OK] key.
5. Press the [Yes] key.
Delete All
You can delete the all registered user codes.
1. Press the [Delete All] key.
2. Press the [Yes] key.
Counter List Print
You can print data for all user codes.
1. Press the [Counter List Print] key.
2. Press the [Print Start] key.
Reset Counters
You can check the number of copies made using each user code. Also, you can clear
each code’s counter.
1. Press the [Reset Counters] key.
2. Input the user code you want to check its number of copies with the
Number keys.
3. Press the [OK] key.
4. Press the [Yes] key.
Menu
Area Shape Priority
Accessible Modes Setting
User Codes Setting
Counter Manager
Key Operator Tools
Use these tools to manage use of the machine.
Note
❐ Enter a previously registered key operator code with the Number keys.
Reference
About the key operator code, ☛ see page 193.