Filter
Top Products
Copying
53
Basic Operation
1
Open the bypass tray.
2
Insert the paper into the bypass tray.
Note
❐ Make sure the front side (the side that has been cop-
ied onto) faces down.
3
Press the [Duplex Back] key.
Note
❐ When you copy onto non-standard size paper, press
the [Custom Size Orig.] key and select or enter the
size. For details, ☛ see page 50.
4
Press the [OK] key.
5
Adjust the paper guides to the paper size.
Note
❐ Make sure that the paper guides match the paper
size. If the paper guides are not adjusted to the pa-
per size properly, paper might be skewed or a paper
misfeed might occur.
6
Set your originals, then press the Start key.