Filter
Top Products
Print Server Manual 31 A741
Final processing by rfxServer.
When the print command is issued in the server a job file is created and
stored in one of the spool directories. This job file contains both the print
options and the raster file generated in the process above.
The rfxServer will do the following actions:
Decompres the Raster file
Scale and/or rotate the image
Add any stamp
7.5 Use of pensets
Various CAD packages and printers use different pensets, which may or
may not have to be redefined for various software and printers.
As described previously when importing a document, pensets are applied
as the document is RIPped. If a penset is added to a project (by group or
individual files), then initially these settings will have no effect until the file is
re-RIPped again. To do so goto the print/plot file properties and select the
Names tab. Press the RIP button. At this moment only the RASTer file is re-
generated. Any changes will not show-up in the thumbnail file. To check if
settings took place start Imaging and see the results.
We now have to add a penset to a project, edit the penset and save it under
a new name. We have to delete the penset we initially added and then
include the newly created penset.
7.6 Use of stamps
Currently we can only use the exiting sample stamps or new stamps
created using only text.