Filter
Top Products
Appendix
138
8
Data storage error. Sample print, locked print, or
accessing the document server
was attempted without the
hard disk installed, or the hard
disk is damaged.
Contact your sales or service
representative.
Driver Setting Error (Memory) There is an error in the down-
loaded font(s).
Reset the parameter for down-
loading fonts.
Insufficient memory or memo-
ry settings for the printer driv-
er may not match memory
actually installed.
Specify correct memory capac-
ity on the [Change Accesso-
ries...] tab in the RPCS printer
driver.
To print the image correctly,
increase memory capacity, or
reduce resolution image.
Duplex has been cancelled. Duplex printing has been can-
celed.
Check the paper used is suita-
ble for duplex printing. Or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Ethernet board has a problem. An error has occurred in the
Ethernet board.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Exceeded max. capacity of
document server. Cannot
store.
Hard disk drive capacity ex-
ceeded storing to the Docu-
ment Server.
Delete some files stored in the
Document Server or decrease
the file size to be downloaded.
Exceeded max. capacity of
system file. Cannot print PDF
file(s).
File system capacity is full,
and the PDF file cannot be
printed.
Delete unnecessary files from
the hard disk.
Exceeded max. number of
files of document server. Can-
not store.
The maximum number of files
stored in the Document Server
has been exceeded.
Delete some files stored in the
Document Server.
Exceeded max. number of
pages of document server.
Cannot store.
The maximum number of pag-
es stored in the Document
Server has been exceeded.
Delete some pages stored in
the Document Server or de-
crease the number of pages to
be downloaded.
Exceeded max. pages. Collate
is incomplete.
The maximum number of pag-
es has been exceeded for colla-
tion.
Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed. If the message ap-
pears again, contact your sales
or service representative.
Messages/Second messages Causes Solutions
JupiterC2EN-Print-F2_FM.book Page 138 Friday, December 17, 2004 8:17 PM