Filter
Top Products
M
AINTENANCE
7.5
7
Cleaning the Scan Unit
Keeping the scan unit clean helps ensure the best possible
copies. We suggest that you clean the scan unit at the start of
each day and during the day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with water.
2
Open the control panel by gripping its bottom and pulling it
upward.
3
Disassemble the white roller as follows:
The right end of the white roller has a plastic bushing that
is snapped shut with small tab on it. Pull the bushing
slightly inward, then rotate the bushing until it reach a slot
(➀). Then pull the roller upward (➁).